# Issue sending webhooks to Microsoft Power Automate

**URL:** <https://devforum.zoom.us/t/issue-sending-webhooks-to-microsoft-power-automate/126386>\
**Category:** API and Webhooks\
**Tags:** webhooks, api\
**Created:** [February 10, 2025, 11:26am UTC](https://devforum.zoom.us/t/issue-sending-webhooks-to-microsoft-power-automate/126386 "2025-02-10T11:26:18Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![josh.marchant](https://sea2.discourse-cdn.com/flex016/user_avatar/devforum.zoom.us/josh.marchant/32/66709_2.png) [@josh.marchant](https://devforum.zoom.us/u/josh.marchant)\
**Post date:** [February 10, 2025, 11:26am UTC](https://devforum.zoom.us/t/issue-sending-webhooks-to-microsoft-power-automate/126386/1 "2025-02-10T11:26:18Z")

</div>

I am trying to setup a Power Automate workflow to use with Zoom app webhooks. I am unable to get the workflow to receive the URL validation request when sent from Zoom.

The workflow is set up to trigger when receiving a POST webhook from Zoom, and if the event type is “endpoint.url\_validation” then it will return the encryptedToken needed for validation.

I can get the workflow to trigger fine if I manually simulate the validation request using Postman, but when I send the validation from Zoon it does not even trigger the workflow to start, which tells me the request probably isn’t being set at all.

I can see lots of articles of people with the same issue but can’t find a solution that works. One person suggested changing the ‘%2F’ values in the URL back to ‘/’, which again works in postman but made no difference from Zoom.

Can anyone advise what’s going wrong here?

Thanks

---

<div class="post-metadata">

**Author:** ![josh.marchant](https://sea2.discourse-cdn.com/flex016/user_avatar/devforum.zoom.us/josh.marchant/32/66709_2.png) [@josh.marchant](https://devforum.zoom.us/u/josh.marchant)\
**Post date:** [February 10, 2025, 3:38pm UTC](https://devforum.zoom.us/t/issue-sending-webhooks-to-microsoft-power-automate/126386/2 "2025-02-10T15:38:49Z")

</div>

This turned out to be due to Power Automate not liking multiple authorisation headers being present in the Zoom validation request. Changing to a custom authentication header resolved the issue.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex016/uploads/zoomdeveloper/original/3X/6/1/614bdd549b610bbaa46ff934617683a02bdaa03c.png) [@system](https://devforum.zoom.us/u/system)\
**Post date:** [February 11, 2025, 3:39pm UTC](https://devforum.zoom.us/t/issue-sending-webhooks-to-microsoft-power-automate/126386/3 "2025-02-11T15:39:30Z")

</div>

Closed on February 11, 2025, 3:39pm UTC

This topic was automatically closed 24 hours after the last reply. New replies are no longer allowed.
